Description
TrueDek Linear Shower Base features a fully integrate drain gulley that is molded directly into a structural, pre-pitched base with a wieght capacity of 560 lbs. Connect one drain to ease installation or connect all three for maximum water volume flow.
FEATURES
- the easiest, fastest way to build a curbless, level-entry shower is with an ARC shower base
- installing this shower base and waterproofing your shower can be completed in one day
- with a TrueDEK shower base you avoid all the difficulty and risk of notching, lowering, or altering the joists
- ARC TrueDEK shower bases take away all of the guesswork and make building a shower so much easier
- this base must be installed so the drain gulley hangs between joists
- this shower base is 7/8” thick at the edges
- cover this base with tile or stone (from ¼” to 1″ thick); this base can also be covered with commercial, weldable vinyl flooring
- to build larger showers use ARC pitch extensions or appropriate mortar products, or install TrueDEK shower bases side-by-side
- install TrueDEK bases on any type of joists, on subfloor, or on concrete
- to complete your shower installation you will need an ARC waterproofing kit and a TrueDEK linear drain cover (available for tile and stone only)
- tile that is 2″ x 2″ or smaller conform to the pitched contours of this shower base; for tile larger than 2″ x 2″, make valley cuts so that the tile lays properly on all pre-pitched surfaces
- when installed properly on joists, all TrueDEK Linear bases will support 800 lbs. or more
- this product is covered by the manufacturer’s limited lifetime warranty
- for more details, please see this product’s Specification Sheet
- please review and understand the TrueDEK Linear Installation Instructions before you begin your project
TRUEDEK LINEAR DRAINS
