Description
Ideal for installation in laundry rooms, pet showers, washrooms, commercial bathrooms, outdoor showers, etc, this Tuff Form is small yet mighty and can be installed with any of our Tuff Form Drains for quick and efficient drainage when it’s needed.
Product Specification:
• Made from compression molded glass-fiber reinforced plastic (GRP) for superior strength
• Install on wooden joists (no need to notch, lower or alter joists), sub-floor, or concrete
• 6¼” drain hole diameter
• 4 pre-sloped gradient planes direct water flow towards drain
• 2% per foot or greater gradient (varies due to length of pitch)
• 7/8″ thick around perimeter
• 1¾” wide leveling rim around perimeter with pre-bored, countersunk pilot holes
• Finish with tile or stone (between ¼”-1″ thick) or commercial-grade weldable vinyl flooring
• For tile that is 2″ x 2″ or smaller, conform to the pitched contours of the base; for tile larger than 2″ x 2″, make valley cuts so the tile lays properly on all pre-pitched surfaces
• Covered by AKW limited lifetime warranty
• You will need an AKW Waterproofing Kit and Tuff Form Drain assembly
• For more details, see Specification Sheet
• Review installation instructions before beginning your project
